|
|
Brake Testers
|
|
Car & Light Commercial vehicle - Class IV & VII VOSA approved Brake Testers
Coming Soon
|
|
Commercial Vehicle Brake Testers for Class IV, V, VII and HGV/PSV Vehicles
Our range covers NEW and Service Exchange Brake Testers of the highest quality. Our service includes No Obligation surveys, - Delivery and Installation - Full Manufacturers Warranty and After Sales Service
|
 |
ARENA XL Type 431 – Analogue Display 13 ton - COMMERCIAL VEHICLE BRAKE TESTER
Suitable for - Class IV,V,VII & HGV /PSV Brake Testing up to 13 ton axle weight.
More information...
- 13 ton Axle Weight capacity
- 2 x 9kw Motors mounted under rollers
- Analogue Display with large double scale
- Galvanised roller set
- Rear raised roller (one direction testing)
- Splash proof roller drive (IP54)
- 8 cell weighing system (optional)
- Drive off aid through worm drive transmission
- Brake Force imbalance indicator
- Installation frame provided (for easy pit construction)
- Standard or Split pit installation
- Includes delivery, Installation and training.
Special New Deal Price - £12,990.00 + vat
Finance available from only -£ 65.35 per week – based on 1 + 59 monthly payments – and subject to agreement.
|
|
| |
OPTIONS
Dual Direction Testing
£320.00 + vat
Cover Plates for Pit installations
£259.00 + vat
Central Cover plate for Non-Pit installation
£374.00 + vat
14 Digit LCD Display to indicate weight and brake force pressures
£2,200.00 + vat
8 -Cell Weighing device
£3,490.00 + vat
Unregulated 4WD kit for single speed roller set
£900.00 + vat
Drive over cover plates (5 tonne axle load)
£1,400.00 + vat
IR Remote Control
£395.00 + vat
100mm Centre roller
£960.00 + vat
Support column for standard cabinet (pedestal)
£199.00 + vat
Swivel plate for support column (pedestal)
£199.00 + vat
Wall bracket for standard cabinet display
£130.00 + vat
A4 Printer with 5m Cable
£649.00 + vat
Shelf for Printer (only with support column)
£190.00 + vat
The ARENA 431 Brake Tester with Analogue display offers the user complete flexibility and can be tailored to suit your on-going requirements.
The user is guided through the complete testing program. The rollers start up as soon as the front wheels are located in position and measures the rolling friction, ovality and brake force. The readings are displayed on the large Analogue Display and registered on the control board. The 50mm elevated rear rollers enable testing with even higher Brake forces. Dual Direction Testing (optional) gives the operator greater flexibility in the range of vehicles that can be tested in the workshop.
The new electronics and innovative design provide the opportunity to progressively upgrade to a complete Test Lane with Computerised control. Technical detail-
- Permissible Axle Weight: 13 ton
- Maximum Brake Force per wheel: 30kN
- Braking Force Display: 2x8.40kN
- Test Speed: 2.5km/h
- Roller diameter: 282mm
- Driver Roller elevated by: 50mm
- Roller Coating: Plastic & SiC
- Max. Motor Power: 2 x 9kW
- Smallest effective axle width: 800mm
- Largest effective axle width: 2800mm
NOTE: The XL431 can be upgraded to the PC Control system with VOSA Database and will give the Brake Tester all the facilities of the Arena XL 441 with the following exceptions.
- Axle load capacity remains at 13 tons
- Applied Park Brake Test is NOT possible
- Roller locking NOT possible, drive off aid by worm gear transmission and rollers starting
Special New Deal Price - £8,490.00 + vat
|
|
| |
ARENA XL Type 441 – Analogue Display 18 ton Axle Load - COMMERCIAL VEHICLE BRAKE TESTER (motors mounted under rollers – installation width 3.5m)
|
|
|
ARENA XL Type 461 – Analogue Display 18 ton Axle Load – COMMERCIAL VEHICLE BRAKE TESTER (motors mounted at the side of the rollers –installation width 4.5m)
More information...
Suitable for - Class IV,V,VII & HGV /PSV Brake Testing up to 18 ton axle weight. Specifications:-
- 18 ton Axle Weight capacity
- 2 x 11kw Motors mounted under or by the side of rollers
- Analogue Display with large double scale
- Galvanised roller set
- Rear raised roller (one direction testing)
- Splash proof roller drive (IP54)
- 8 cell weighing system (optional)
- Drive off aid through worm drive transmission
- Brake Force imbalance indicator
- Installation frame provided (for easy pit construction)
- Standard or Split pit installation
- Includes delivery, Installation and training.
Special New Deal Price - £16,990.00 + vat
Finance available from only £85.47 per week – based on No Deposit and 1 + 59 monthly payments – subject to agreement
|
|
| |
OPTIONS
Dual Direction Testing
£320.00 + vat
Cover Plates for Pit installations
£259.00 + vat
Central Cover plate for Non-Pit installation
£374.00 + vat
14 Digit LCD Display to indicate weight and brake force pressures
£2,200.00 + vat
8 -Cell Weighing device
£3,490.00 + vat
Unregulated 4WD kit for single speed roller set
£900.00 + vat
Drive over cover plates (5 tonne axle load)
£1,400.00 + vat
IR Remote Control
£395.00 + vat
100mm Centre roller
£960.00 + vat
Support column for standard cabinet (pedestal)
£199.00 + vat
Swivel plate for support column (pedestal)
£199.00 + vat
Wall bracket for standard cabinet display
£130.00 + vat
A4 Printer with 5m Cable
£649.00 + vat
Shelf for Printer (only with support column)
£190.00 + vat
Drive Motors with Electronic Locking for Rollers
£1240.00 + vat
198700UF5A Auxiliary IR receiver with 25m extension cable
£130.00 + vat
Simultaneous indicating display with two scales and 25m connecting cable
£2450.00 + vat
The ARENA 441/461 Brake Tester with Analogue Display offers the user complete flexibility and can be tailored to suit your on-going requirements.
The user is guided through the complete testing program. The rollers start up as soon as the front wheels are located in position and measures the rolling friction, ovality and brake force. The readings are displayed on the large Analogue Display and registered on the control board. The 50mm elevated rear rollers enable testing with even higher Brake forces. Dual Direction Testing (optional) gives the operator greater flexibility in the range of vehicles that can be tested in the workshop.
The new electronics and innovative design provide the opportunity to progressively upgrade to a complete Test Lane with Computerised control. Technical detail-
- Permissible Axle Weight: 18 ton
- Maximum Brake Force per wheel:40kN
- Braking Force Display: 2x8.40kN
- Test Speed: 2.5 and 5.0 km/h
- Roller diameter: 282mm
- Driver Roller elevated by: 50mm
- Roller Coating: Plastic & SiC
- Max. Motor Power: 2 x 11kW
- Smallest effective axle width: 800mm
- Largest effective axle width: 2800mm
NOTE: The XL441/461 can be upgraded to the PC Control system –Comfort Line with full VOSA Database and will give the Brake Tester all the facilities of the Arena XL 441 PC.
Special New Deal Price - £8,590.00 + vat
|
|
| |
ARENA XL Type 441PC- Computer Controlled–18 ton Axle Load COMMERCIAL VEHICLE BRAKE TESTER (Motors mounted under rollers –installation width 3.5m)
|
|
|
ARENA XL Type 461PC- Computer Controlled –18 ton Axle Load COMMERCIAL VEHICLE BRAKE TESTER (Motors mounted at the side of the rollers –installation width 4.5m)
More information...
Class IV,V,VII & HGV /PSV Brake Testing up to 18 ton axle weight. Specifications:-
- 18 ton Axle Weight capacity
- PC Control system includes PC, Keyboard, Mouse, Printer
- 2 x 22” Flat Screen Monitors
- Fully Automatic and Manual test programs
- VOSA Database
- Applied Brake Test for Parking Brake
- 2 x 11kw Motors mounted under or by the side of rollers
- Analogue Dial or Bar Graph Display, selectable by operator
- Galvanised roller set
- Rear raised roller (one direction testing)
- Splash proof roller drive (IP54)
- 8 cell weighing system (optional)
- Roller Locking
- Brake Force imbalance indicator
- Installation frame provided (for easy pit construction)
- Standard or Split pit installation
- Includes delivery, Installation and training.
- Centre cover between rollers
Special New Deal Price - £23,990.00 + vat
Finance available from only £120.69 per week – based on No Deposit and 1 + 59 monthly payments – subject to agreement
|
|
| |
OPTIONS-
Dual Direction Testing
£320.00 + vat
Rug Board, Touch Screen Remote Control
£1,900.00 + vat
Cover Plates for Pit installations
£259.00 + vat
Central Cover plate for Non-Pit installation
£374.00 + vat
14 Digit LCD Display to indicate weight and brake force pressures
£2,200.00 + vat
8 -Cell Weighing device
£3,490.00 + vat
Unregulated 4WD kit for single speed roller set
£900.00 + vat
Drive over cover plates (5 tonne axle load)
£1,400.00 + vat
IR Remote Control
£395.00 + vat
Hydraulic Load Simulator with Floor Mounting kit
£5990.00 + vat
The user is guided through the complete VOSA testing program. The rollers start up as soon as the front wheels are located in position and measures the rolling friction, ovality and brake force. The readings are displayed 2 x 22” Flat Screen Monitors. The 50mm elevated rear rollers enable testing with even higher Brake forces. Dual Direction Testing (optional) gives the operator greater flexibility in the range of vehicles that can be tested in the workshop.
The new electronics and innovative design provide the opportunity to progressively upgrade to a complete Test Lane with Computerised control. Technical detail-
- Permissible Axle Weight: 18 ton
- Maximum Brake Force per wheel: 40kN
- Braking Force Display: 2x8.40kN
- Test Speed: 2.5 and 5.0 km/h
- Roller diameter: 282mm
- Driver Roller elevated by: 50mm
- Roller Coating: Plastic & SiC
- Max. Motor Power: 2 x 11kW
- Smallest effective axle width: 800mm
- Largest effective axle width: 2800mm
|
|
 |
SPECIAL NEW DEAL PACKAGE - Complete VOSA Approved package to ATF Test Specifications
ATT – Nussbaum PC- Computer Controlled –18 ton Axle Load COMMERCIAL VEHICLE BRAKE TESTER
Suitable for – Class IV,V,VII & HGV / PSV all Brake Testing To - VOSA – ATF Test Station Requirements
Specifications:-
- 18 ton Axle Weight capacity
- PC Control system includes PC, Keyboard, Mouse, Printer
- 2 x 42” Flat Screen Monitors – Wall Mounted
- Fully Automatic and Manual test programs
- Full VOSA Database
- Applied Brake Test for Parking Brake
- 2 x 11kw Motors mounted under or optional -by the side of rollers
- Analogue Dial or Bar Graph Display, selectable by operator
- Galvanised roller set
- Dual Direction Testing (or optional single direction with raised Roller)
- Splash proof roller drive (IP54)
- 8 cell weighing system
- Roller Locking option ( recommended for Buses and Automatic Vehicles)
- Brake Force imbalance indicator
- Installation frame provided (for easy pit construction)
- Standard or Split pit installation
- Includes delivery, Installation to a prepared site & full Training
- Centre cover between rollers
- IR Remote Control
£26,490.00 + vat
Finance available from only £133.93 per week (£19.08 per day)
Based on No Deposit and 1 + 59 monthly payments – subject to agreement
OPTIONS-
- (1) Rug Board, Touch Screen Remote Control - £1,995.00 + vat
- (2) Cover Plates for Pit installations - £259.00 + vat
- (3) Central Cover plate for Non-Pit installation - £374.00 + vat
- (4) Electro – Mechanical Locking System, recommended for Buses and Automatic Commercial Vehicles - £1,423.00 + vat
- (5) Drive over cover plates (5 tonne axle load) - £1,400.00 + vat
- (6) Hydraulic Load Simulator with Floor Mounting kit - £5,999.00 + vat
- (7) Ground Works to include 2m of Cable Ducting - £4,300.00 + vat (Price indication only, final price subject to survey)
The user is guided through the complete VOSA testing programme.
The Rollers start up as soon as the front wheels are located in position and measures the rolling friction, OVALITY and Brake Force.
The readings are displayed on 2 x 42" Flat Screen Monitors.
The Optional 50mm elevated rear rollers enable testing with even higher Brake forces (Single direction testing only)
Dual Direction Testing gives the operator greater flexibility in the range of vehicles that can be tested in the workshop
Technical detail-
- * Permissible Axle Weight - 18 ton
- * Maximum Brake Force per wheel - 40kN
- * Braking Force Display - 2x8.40kN
- * Test Speed - 2.5 and 5.0 km/h
- * Roller diameter - 282mm
- * Driver Roller elevated by - 50mm
- * Roller Coating - Plastic & SiC
- * Max. Motor Power - 2 x 11kW
- * Smallest effective axle width - 800mm
- * Largest effective axle width - 2800mm
Notes:
- The prices quoted include Delivery and Installation to a prepared site (UK mainland only)
- Delivery approx. 4-6 weeks from Official Order.
|
NOTES: Prices quoted do not include VAT
No Deposit Finance facilities available subject to agreement if required
|
